HP 3070 and
Teradyne 800/1800
Reciever POGO®
Test Center .100 (2.54)
| Probe Specifications | |
| Mechanical | |
| Full Travel: | .250 (6.35) |
| Recommended Working Travel: |
.167 (4.24) |
| Mechanical Life Exceeds: | 2 x 106 cycles |
|
|
|
| Operating Temperature | -55°C to +105°C |
| Consult factory for other temperature requirements, and applications below -40° | |
|
|
|
| Electrical (Static Conditions) | |
| Current Rating: | 10 amps |
| Maximum continuous current, non-inductive at working travel | |
|
|
|
| Probe Resistance | 8 milliohms |
| With a standard deviation of <1 milliohm @ 5 mA test current | |
|
|
|
| Materials and Finishes | |
| Plunger: | Heat-treated beryllium copper, gold-plated over hard nickel |
| Barrel: | Work-hardened phosphor bronze, HPA-GOLD" plated (I.D. and O.D.) over hard nickel |
| Spring: | Music wire |
| Ball: | Stainless steel |
| Receptacle Specifications | |
| Mounting Hole Size: | .067/.069 (1.70/1.75) |
| A #51 or 1.75 mm drill is most commonly used | |
|
|
|
| Recommended Wire Gauge: | 22-26 AWG |
|
|
|
| Connections: |
SPR-25W Crimp or push-on termination (AMP terminal 60983-1 or equivalent )
SPR-25W-1 Solder cup SPR-25W-2 Wire wrap/square post. Vacuum leak rate not to exceed 1 x 10-4 CFM @ 15 psi SPR-25W-3 Connector pin/round post |
|
|
|
| Materials and Finishes | |
| Housing: | Work-hardened nickel silver, gold plated over hard nickel |
| Round Post: | Phosphor bronze, gold plated |
| Square Post: | Phosphor bronze, gold plated |
Tips (top)
Spring Force (top)
| Spring Force in oz. (grams) | |||
|
Spring Type
|
|
|
|
| To order, add dash number to model number | |||
| Light | -2 |
|
|
| Standard | -4 |
|
|
| Alternate | -6 |
|
|
| High | -8 |
|
|
| Ultra High | -10 |
|
|
| Optional spring force and materials are available. | |||
Connectors (top)
How to Order (top)
For each probe, specify the probe model and tip style as shown in the example below. If required, specify the optional non-standard spring force.
Example:
