|
|
|
|
|
|
|
|
|
|
POGO® -25T
HP 3070 and
Teradyne 800/1800
Reciever POGO®
Test Center .100 (2.54)
Tips
Spring Force
Connectors
How to Order
|
|
|
|
|
| Probe Specifications |
| Mechanical |
| Full Travel: |
.250 (6.35) |
Recommended
Working Travel: |
.167 (4.24) |
| Mechanical Life Exceeds: |
2 x 106 cycles |
|
| Operating Temperature |
-55°C to +105°C |
| Consult factory for other temperature requirements, and applications below -40° |
|
| Electrical (Static Conditions) |
| Current Rating: |
10 amps |
| Maximum continuous current, non-inductive at working travel |
|
| Probe Resistance |
8 milliohms |
| With a standard deviation of <1 milliohm @ 5 mA test current |
|
| Materials and Finishes |
| Plunger: |
Heat-treated beryllium copper, gold-plated over hard nickel |
| Barrel: |
Work-hardened phosphor bronze, HPA-GOLD" plated (I.D. and O.D.) over hard nickel |
| Spring: |
Music wire |
| Ball: |
Stainless steel |
|
|
| Receptacle Specifications |
| Mounting Hole Size: |
.067/.069 (1.70/1.75) |
| A #51 or 1.75 mm drill is most commonly used |
|
| Recommended Wire Gauge: |
22-26 AWG |
|
| Connections: |
SPR-25W Crimp or push-on termination (AMP terminal 60983-1 or equivalent )
SPR-25W-1 Solder cup
SPR-25W-2 Wire wrap/square post. Vacuum leak rate not to exceed 1 x 10-4 CFM @ 15 psi
SPR-25W-3 Connector pin/round post
|
|
| Materials and Finishes |
| Housing: |
Work-hardened nickel silver, gold plated over hard nickel |
| Round Post: |
Phosphor bronze, gold plated |
| Square Post: |
Phosphor bronze, gold plated |
|
|
Tips (top)
Spring Force (top)
| Spring Force in oz. (grams) |
|
Spring Type
|
Preload
|
2/3 Travel
|
| To order, add dash number to model number |
| Light |
-2 |
.70 (20)
|
2.0 (57)
|
| Standard |
-4 |
1.24 (35)
|
4.0 (114)
|
| Alternate |
-6 |
1.73 (49)
|
6.0 (170)
|
| High |
-8 |
2.15 (61)
|
8.0 (227)
|
| Ultra High |
-10 |
1.87 (53)
|
10.0 (283)
|
| Optional spring force and materials are available. |
Connectors (top)
How to Order (top)
For each probe, specify the probe model and tip style as shown in the example below. If required, specify the optional non-standard spring force.
Example:
Order Form
|
©1998-2003 Everett Charles Technologies. All rights reserved. Everett Charles Technologies, 700 E. Harrison Ave., Pomona, CA, 91767, U.S.A.
|
