|
|
|
|
|
|
|
|
|
|
|
| Probe Specifications |
| Mechanical |
| Full Travel: |
.250 (6.35) |
| Recommended Working Travel: |
.167 (4.24) |
| Mechanical Life Exceeds: |
.25 x 106 cycles |
|
| Operating Temperature |
-55°C to +150°C |
| Consult factory for other temperature requirements, and applications below -40° |
|
| Electrical (Static Conditions) |
| Current Rating |
15 amps |
| Maximum continuous current, non-inductive at working travel |
|
| Probe Resistance |
25 milliohms |
| With a standard deviation of <3 milliohms @ 25 mA test current |
|
| Materials and Finishes |
| Plunger: |
Heat-treated beryllium copper, gold plated over hard nickel |
| Barrel: |
Work-hardened nickel silver, silver plated (I.D. and O.D.) over hard nickel |
| Spring: |
Stainless steel, silver plated |
| Ball: |
Brass, gold plated |
| |
|
| Receptacle Specifications |
| Use SPR Series: |
SPR-3 series |
|
| NOTE: The wire gauge listed on the referenced pages is for typical ATE applications only. Larger wire size may be required for other applications. |
|
|
HCP-13
High-Current Probe
Test Center .125 (3.18)
Tips
Spring Force
How to Order
|
|
|
Tips (top)
Spring Force (top)
| Spring Force in 0z. (grams) |
| Spring Type |
|
Preload |
2/3 Travel |
| HCP-13 |
|
1.54 (44) |
4.5 (128) |
How to Order (top)
For each probe, specify the probe model and tip style as shown in the example below. If required, specify the optional non-standard spring force.
Example:
Order Form
|
©1998-2003 Everett Charles Technologies. All rights reserved. Everett Charles Technologies, 700 E. Harrison Ave., Pomona, CA, 91767, U.S.A.
|
