 
|
| Mounting Hole Size: | .053/.055 (1.35/1.40) |
| A #54 or 1.4 mm drill is most commonly used. | |
| Recommended Wire Gauge: | 24-28 AWG |
| Connections: | |
| SPR-1W | Crimp |
| SPR-1W-1 | Solder cup |
|
SPR-1W-2 |
Wire wrap/square post. Vacuum leak rate not to exceed 1 x 10-4 CFM @ 15 psi |
| Materials and Finishes: | |
| Housing | Work-hardened nickel silver, gold plated over hard nickel |
| Square post | Phosphor bronze, gold plated |
![[ Tip Styles for the SPA-1 ]](/data/images/tip-btn.gif)
|
![[ Return to SPA- Probe Page ]](/data/images/spa1btn.gif)
|
![[ Search ]](/images/srch-btn.gif)
|
![[ Top of Page ]](/images/top.gif)
|
![[ ECT Home Page ]](/images/mainpage.gif)
|
![[ Product Information ]](/images/prodinfo.gif)
|
![[ Spring Contact Products Home Page ]](/data/images/sctpbar.gif)
|
![[ Spring Contact Test Probes: Table of Contents ]](/data/images/sctptoc.gif)
|
|