Receptacle Specifications

All dimensions in inches (mm.)

Mounting Hole Size: .053/.055 (1.35/1.40)
A #54 or 1.4 mm drill is most commonly used.
Recommended Wire Gauge: 24-28 AWG
LTR-1W Crimp
LTR-1W-1 Solder cup

Wire wrap post. Vacuum leak rate not
to exceed 1 x 10 -4 CFM @15 psi
Materials and Finishes:
Housing Work-hardened nickel silver, gold plated over hard nickel
Round post Phosphor bronze, gold plated
Square post Phosphor bronze, gold plated

[ Tip Styles for the HTP-1 ] [ Return to SPA- Probe Page ] [ Search ]

[ Top of Page ] [ ECT Home Page ] [ Product Information ] [ Spring Contact Products Home Page ] [ Spring Contact Test Probes: Table of Contents ]

Website designed and produced by D&D Consulting.
© 1995 Everett Charles Technologies. All rights reserved.