Receptacle Specifications

All dimensions in inches (mm.)

Mounting Hole Size: .035/.0365 (.89/.93)
A #64 or 0.92 mm drill is most commonly used.
Recommended Wire Gauge: 28-30 AWG
Connections:
SPR-0W


 Crimp (To order with 30 inches of 28 AWG wire attached,
add -28 to the model number. For 30 AWG wire, add -30 to the model number.)
SPR-0W-1 Solder cup
SPR-0W-4

 FASTITE® wire termination, (30 AWG only),
maximum insulation diameter .019(.48), wire strip length = .125 (3.2)
DS-62-1 Insulation sleeve (use with SPR-0W-4)
FWA-1-30 30 AWG wire with DS-62-1 insulation sleeve attached
Materials and Finishes: Work-hardened nickel silver, gold plated over hard nickel

One DS-62-1 sleeve is provided with each HPA-0W-4 receptacle at no charge.
If additional quantities are required, please contact the factory for pricing and delivery.

The HPA-50 may be used to test bare PCBs on mixed test centers with the SPA-64 and HPA-52.

[ Tip Styles for the HPA-50 ] [ Return to HPA-50 Probe Page ] [ Search ]


[ Top of Page ] [ ECT Home Page ] [ Product Information ] [ Spring Contact Products Home Page ] [ Spring Contact Test Probes: Table of Contents ]
Website designed and produced by D&D Consulting.
© 1995 Everett Charles Technologies. All rights reserved.