Receptacle Specifications

All dimensions in inches (mm.)

Mounting Hole Size: .067/.069 (1.7/1.75)
A #51 or 1.75 mm drill is most commonly used.
Recommended Wire Gauge: 22-26 AWG

Crimp or push-on termination
(AMP terminal 60983-1 or equivalent)
SPR-25W-1 Solder cup

Wire wrap/square post .Vacuum
leak rate not to exceed 1 x 10-4 CFM @ 15 psi
SPR-25W-3 Connector pin/round post
Materials and Finishes:
Housing Work-hardened nickel silver, gold plated over hard nickel
Round post Phosphor bronze, gold plated
Square post Phosphor bronze, gold plated

[ Tip Styles for the SPA-4 ] [ Return to SPA-4 Probe Page ] [ Search ]

[ Top of Page ] [ ECT Home Page ] [ Product Information ] [ Spring Contact Products Home Page ] [ Spring Contact Test Probes: Table of Contents ]

Website designed and produced by D&D Consulting.
© 1995 Everett Charles Technologies. All rights reserved.