Probe Specifications


All dimensions in inches (mm.)

Full Travel: .250 (6,35)
Recommended Working Travel: .167 (4,24)
Mechanical Life (cycles): exceeds .100 x 106 cycles
Plunger Rotation: 60 degrees at .167 travel
Operating Temperature: -55 degrees C to + 105 degrees C
Consult factory for other temperature requirements.


Electrical (Static Conditions)
Current Rating: 3 amps maximum continuous current, non-inductive at working travel
Probe Resistance: 10 mOHMS, with a standard deviation of <1 mOHMS at 25 mA test current


Spring Force +/- 20% in oz. (gram)
Spring Type Dash Number Preload 2/3 Travel
Standard as shown 0.82 (23) 4.0 (113)
To order, add dash number to Model Number.
Optional spring forces and materials are available.


Materials and Finishes
Plunger:
Barrel:

Spring:		 Heat-treated beryllium copper, gold plated over hard nickel
Heat-treated beryllium copper, HPA-GOLDTM plated
(I.D. & O.D.) over hard nickel
Music wire, gold plated


[ Tip Styles for the HTP-1 ] [ Receptacles for the HTP-25 ] [ Search ]


[ Top of Page ] [ ECT Home Page ] [ Product Information ] [ Spring Contact Products Home Page ] [ Spring Contact Test Probes: Table of Contents ]
Website designed and produced by D&D Consulting.
© 1995 Everett Charles Technologies. All rights reserved.